Fisair presents the latest in humifiers and dehumifiers in the IFEMA C&R Salon

Madrid, Mar. (notimérica) -

La firma Fisair participa desde este martes en el Salón Internacional de Aire Acondicionado, Calefacción, Ventilación, Frío Industrial y Comercial --C&R Climatización y Refrigeración-- organizado en IFEMA (Madrid) que finaliza hoy.

This Spanish company is dedicated to "humidifying and dehumidifying the air to apply it in different industrial processes," a representative of the company present at the Madrid Fair explains to notimérica.

Fisair presenta en C&R dos tipos de humidificadores: los DIPHUSAIR y los adiabáticos. El primer modelo funciona mediante la inyección de vapor al aire, mientras que el segundo consiste en hacer humedecer unos paneles para conseguir humedecer el aire cuando éste pase por ellos.

The firm works both with ducts and with air treatment units (UTA) and, depending on the client's wishes, "we use an application or another," says the representative.

As for the dehumidifiers, Fisair exhibits in the Madrid Hall of its DFLEX models, which work through three reactivation modes: through steam, electric batteries and gas burners.

The DFLEX dehumidifier continues and simultaneously two air flows through the desiccant rotor: an air flow to dry (process air) and a rotor reactivation flow (wet air).The process air, after being filtered, accesses the desiccant rotor, giving it a large part of the water vapor it contains, and is extracted from the dehumidifier, by means of a fan, as dry air to boost the system or area to be treated.

The rotor reactivation air is taken from the exterior, filtered and heated by battery of electrical resistors, steam, thermal oil or natural combustion gas burner.Once the temperature necessary to transport the water vapor retained by the desiccant rotor, a fan extracts this wet air, to be expelled abroad.